Wholesale Polyethylene PE1000 Sheet - UHMWPE Wear-Resistant Manufacturer and Supplier |Ma waho aku

Pepa Polyethylene PE1000 – UHMWPE Wear-Resistant

wehewehe pōkole:

ʻO ka polyethylene UHMW-PE / PE 1000 ke kaumaha me ke kaumaha molekala kiʻekiʻe.Mahalo i ko lākou kaumaha molekala kiʻekiʻe, ʻo kēia ʻano UHMW-PE kahi mea kūpono no nā noi, e koi ana i nā waiwai sliding maikaʻi loa a me ke kūpaʻa ʻana.

E hoʻouna i ka leka uila iā mākou

Huahana Huahana

wikiō

Huahana Huahana

Hōʻuluʻulu manaʻo

ʻO ka pepa Polythylene PE 1000 i kapa pinepine ʻia he ultra-high-molecular-weight, UHMW, a i ʻole UHMWPE, ʻo ia kekahi o kā mākou mea ʻenehana loea kaulana loa.Hāʻawi ia i ke kūpaʻa maikaʻi loa i ka abrasion, nā kemika, ka hopena a me ka ʻaʻahu, a hāʻawi i ka haʻahaʻa haʻahaʻa o ka friction.ʻAʻole ʻawaʻawa ʻo UHMW, ʻaʻala ʻole, a kūpaʻa loa i ka mosture.

Hoʻohana pinepine ʻia ka pepa plastik UHMW i nā ʻāpana lole, nā alakaʻi kaulahao a me nā ʻāpana hoʻololi a he plastik ʻenekinia kaulana i ka hana ʻai ʻana a me nā hana ʻōmole.Hoʻohana pū ʻia nā māka kikoʻī o PE1000 i nā noi hoʻohana ʻana i nā mea nui i ka laina chutes, hoppers a me nā kaʻa hoʻolei, e kōkua ana i ka hoʻomaikaʻi ʻana i ke kahe o ka huahana a pale aku i ka ratholing a me ka pana ʻana.

ʻĀpana

ʻAʻole.	'ikamu	Unite	Kūlana hoʻāʻo	Ka hopena
1	ʻO ka mānoanoa	g/cm³	GB/T1033-1966	0.91-0.96
2	Hoʻemi ʻia %		ASTMD6474	1.0-1.5
3	ʻO ka hoʻolōʻihi i ka wā hoʻomaha	%	GB/T1040-1992	238
4	Ka ikaika tensile	Mpa	GB/T1040-1992	45.3
5	ʻO ka hoʻāʻo ʻana i ka paʻakikī 30g	Mpa	DINISO 2039-1	38
6	ʻO Rockwell paʻakikī	R	ISO868	57
7	Ka ikaika kulou	Mpa	GB/T9341-2000	23
8	Ka ikaika hoʻoemi	Mpa	GB/T1041-1992	24
9	ʻO ka mahana hoʻoluʻu paʻakikī.		ENISO3146	132
10	wela kūikawā	KJ(Kg.K)		2.05
11	Ka ikaika pili	KJ/M³	D-256	100-160
12	Ka hoʻoili wela	%(m/m)	ISO11358	0.16-0.14
13	ʻO nā waiwai hoʻoheheʻe a me ka helu friction		PALU	0.19
14	ʻO nā waiwai hoʻoheheʻe a me ka helu friction		PLASTIK/SELE	0.14
15	ʻO ka paʻakikī kahakai D			64

Nā hiʻohiʻona

1. Hoʻomaikaʻi i ka pale ʻana i ka ʻaʻahu.ʻO kekahi o nā waiwai koʻikoʻi loa o ka UHMW polyethylene ʻo kona kūpaʻa abrasion kiʻekiʻe loa, he mea waiwai nui ia i nā noi ʻenekinia.Ma waena o nā plastics āpau, ʻoi aku ka maikaʻi o kona pale ʻana, a ʻo ke kūpaʻa maʻamau o nā mea metala he nui (e like me ke kila kalapona, ke kila kila, ke keleawe, a me nā mea ʻē aʻe) ʻaʻole maikaʻi e like me ia.I ka piʻi ʻana o ke kaumaha o ka polyethylene, ʻoi aku ka paʻa o ka lole.

2. Kiʻekiʻe loa ka hopena hopena.ʻO ka ikaika hopena o ka polyethylene kaumaha ultra-kiʻekiʻe e pili ana i kona kaumaha mole.Ke emi iho ka paona mole ma mua o 2 miliona, piʻi ka ikaika o ka hopena me ka piʻi ʻana o ke kaumaha mole, a hiki i kahi kiʻekiʻe ma kahi o 2 miliona.Ma hope o ke kiʻekiʻe, piʻi ka ikaika o ka hopena me ke kaumaha mole.e emi ana.ʻO kēia no ka mea he ʻano ʻino ke kaulahao molekala a keʻakeʻa nei i kāna photocrystallization, no laila aia kahi ʻāpana amorphous nui i loko o ka macromolecule, hiki ke hoʻopaʻa i ka ikehu hopena nui.

3. Haʻahaʻa friction coefficient.ʻO ka UHMWPE he mea kūʻokoʻa loa, he haʻahaʻa haʻahaʻa o ka friction a me ka lubrication ponoʻī maikaʻi, a he mea kūpono no ka lawe ʻana i nā bushings, sliders a me nā linings.

ʻO ka hoʻohana ʻana i ka polyethylene kaumaha ultra-kiʻekiʻe e like me ka ʻāpana friction o nā mea hana ʻaʻole hiki ke hoʻomaikaʻi wale i ke ola pale lole, akā mālama pū kekahi i ka ikehu.

4. Kūʻē kemika maikaʻi.ʻO ka polyethylene kaumaha kiʻekiʻe kiʻekiʻe he kūpaʻa kino kino.Koe wale no ka waika nitric concentrated a me ka waika sulfuric concentrated, aole ia e corroded i na lye a me na waiuma waika a pau, a hiki ke hoohana ia i loko o ka concentrated hydrochloric acid ma kahi mahana (80°C, Paa no hoi ia ma <20% nitric acid, < 75% sulfuric acid, a paʻa nō hoʻi i ka wai, holoi wai.)

Eia naʻe, maʻalahi loa ka pehu ʻana o ka polyethylene kaumaha ultra-kiʻekiʻe i loko o nā pūhui ʻala a i ʻole halogenated (ʻoi loa ma lalo o nā kūlana wela kiʻekiʻe), no laila pono e uku ʻia i ka wā e noi ai.

5. Haʻahaʻa loa ka wai.ʻO ka UHMWPE he haʻahaʻa haʻahaʻa loa o ka hoʻoheheʻe ʻana i ka wai, ʻaneʻane ʻaʻole ia e pehu, ʻaʻole e pehu i ka wai, a ʻoi aku ka liʻiliʻi ma mua o ka nylon.

6. Nā waiwai wela.E like me ke ʻano o ka ASTM (hoʻouka 4.6kg/cm2), ʻo 85 ℃ ka wela distortion wela.Ma lalo o kahi haʻahaʻa liʻiliʻi, hiki i ka mahana lawelawe ke hiki i 90 ℃.I nā kūlana kūikawā, uaʻaeʻia e hoʻohana i kahi mahana kiʻekiʻe.High molecular kaumaha polyethylene mea he mea me ka maikai toughness, no laila, kona haʻahaʻa kū'ē ua maikaʻi loa, a ia mau nō kekahi degere o ka ductility ma ka haʻahaʻa wela o -269 ° C, aʻaʻohe hōʻailona o ka embrittlement.

7. Nā waiwai uila.Loaʻa i ka UHMWPE nā waiwai uila maikaʻi loa ma kahi ākea ākea, ʻo 10-18CM kona kūʻē leo, ʻo 50KV/mm kona hoʻohaʻahaʻa, a ʻo kāna mau dielectric he 2.3.Ma kahi ākea ākea a me ke alapine, hoʻololi liʻiliʻi kona mau waiwai uila.I loko o ka wela wela, kūpono loa ia no ka hoʻohana ʻana i nā mea hana i ka ʻenekini uila a me nā mea i loko o nā wili pepa.

8. Non-toxic ultra-high molecular weight polyethylene is tasteless, non-toxic, odorless, non-corrosive, a he physiological circulation a me physiological adaptability.ʻO ka United States Food and Drug Administration (FDA) a me ka United States Department of Agriculture (USDA) e ʻae iā ia e hoʻohana ʻia i ka pilina me nā meaʻai a me nā lāʻau lapaʻau.

ʻO kona mau hiʻohiʻona, ʻoi aku ka maikaʻi o ka pale ʻana, ka pale ʻana i ka hopena, a me nā waiwai lubricating ponoʻī, ʻo ia ka mea maikaʻi loa ma waena o nā plastics engineering.

Nui mau

inoa mea kūʻai	Kaʻina Hana Hana	Nui（mm）	kala kala
Pepa UHMWPE	mold press	20303030（10-200）	keʻokeʻo, ʻeleʻele, uliuli, ʻōmaʻomaʻo, ʻē aʻe
		12404040（10-200）
		12503050（10-200）
		21006100（10-200）
		20505050（10-200）
		12003000（10-200）
		15507050（10-200）

Hoʻohana Huahana

ʻO ka polyethylene kaumaha kiʻekiʻe kiʻekiʻe e pili ana i ka linear structure polyethylene me ke kaumaha molekala ma mua o 3 miliona.He plastik ʻenekinia me ka hana piha maikaʻi loa.ʻO kāna mau waiwai ʻelima ka pale ʻana i ka lole, ka hopena hopena, ka pale ʻana i ka corrosion, ka lubrication ponoʻī, a me ka hopena o ka ikehu.Aia nā mea ʻoi aku ka maikaʻi o nā plastics, i ʻike ʻia ma ka honua he "mea kupanaha".

1. Nā noi e pili ana i ka pale ʻana i ka lole a me ka hopena hopena
1) Mekini lole lole
ʻO ka mīkini lole ka papa noi mua loa o UHMWPE.I kēia manawa, aia he 30 mau ʻāpana UHMWPE i hoʻohana ʻia ma nā ʻāina ʻē i kēlā me kēia mīkini lole, e like me nā koho kaʻa, nā lāʻau kaʻa, nā mea hoʻohui, nā koʻokoʻo sweeping, nā poloka pale, nā eccentrics, nā lāʻau lāʻau, nā kaola hoʻihoʻi, a pēlā aku.
2) Nā mīkini hana pepa
ʻO ka mīkini pepa ka ʻāpana ʻelua o ka noi UHMWPE.I kēia manawa, ʻo ka nui o ka UHMWPE i hoʻohana ʻia i nā mīkini hana pepa he 10% o ka huina.Nā huila alakaʻi, nā ʻōpala, nā kānana, etc.
3) Mīkini hoʻopili
E hoʻohana i ka UHMWPE e hoʻololi i nā fluoroplastics i hoʻololi ʻia e hana i nā ala alakaʻi, nā noho paheʻe, nā papa paʻa, a me nā mea ʻē aʻe o nā mea lawe, UHMW-PE alakaʻi alakaʻi, spacers, a me nā pale kiaʻi (mea kila plastik).
4) Nā mīkini maʻamau
Hiki ke hoʻohana ʻia ka UHMWPE no ka hana ʻana i nā mīkini, nā kāmela, nā impellers, rollers, pulleys, bearings, bushes, bushings, pins, gaskets, gaskets, elastic couplings, screws, pipe clamps, etc.

2. Nā noi e pili ana i ka lubricating pono'ī a me nā waiwai non-stick
1) mālama waiwai a me ka lawe ʻana
Hiki ke hoʻohana ʻia ka UHMWPE no ka hana ʻana i nā linings pauka, e like me: silo, hopper, chute a me nā mea hoʻihoʻi ʻē aʻe, nā papa hoʻoheheʻe, nā wili, a me nā mea ʻē aʻe.
2) mahiʻai, mīkini hana
Hiki ke hoʻohana ʻia ka UHMWPE no ka hana ʻana i nā pā a me nā pale pale no nā mea mahiʻai.
3) mea kākau
Hiki ke hoʻohana ʻia ʻo UHMWPE e hana i nā papa sled skating, nā papa sled, etc.

3. Nā noi e pili ana i ka pale ʻana i ka corrosion a me ka absorption wai ʻole
1) pahu pahu
ʻO ka hoʻohana ʻana i ka UHMW-PE no ka hana ʻana i nā ipu wai mehana no nā lako ikehu lā i kēia manawa kekahi o nā māla i hoʻohana nui ʻia o UHMWPE.
2) mea hana kemika
E hoʻohana i ka UHMW-PE e hana i nā ʻāpana ʻoihana kemika, e like me: nā mea hoʻopihapiha hoʻopaʻa, nā mea hoʻopihapiha, nā pahu mold vacuum, nā ʻāpana pamu, nā lāʻau, nā mea hana, nā hui hoʻopaʻa, etc.
3) ka paipu

4. ʻO nā noi i maʻemaʻe a ʻaʻohe mea ʻawaʻawa
1) ʻoihana meaʻai a me nā mea inu
I loko o ka ʻoihana māmā mea inu, hoʻohana nui ʻia kona kūpaʻa ʻaʻahu koʻikoʻi, ka hopena o ka hopena, ka lubrication ponoʻī a me ka non-toxicity no ka hana ʻana i nā ʻano mea like ʻole, cams, conveyor line wear-resistant guardrails, gaskets, alakaʻi alakaʻi a me nā ʻano anti-friction, ponoʻī- lubricating Nā lāʻau lubricated, liners, etc. E like me: kiaʻi kiaʻi, huila hōkū, alakaʻi kaʻa, bearing bushes, etc. o nā mīkini meaʻai.

5.Application o nā waiwai ʻē aʻe: ʻāpana moku, haʻahaʻa haʻahaʻa haʻahaʻa haʻahaʻa mechanical, etc.
1) noi haʻahaʻa haʻahaʻa pale pale
2) Ka hoʻohana ʻana i nā waiwai insulation uila
3) Hoʻohana ʻia i loko o nā lua lanahu